How to Service and Repair a Drive Shaft for Rear on 2005 Dodge Durango?

Before servicing or repairing the rear propeller shaft, place the vehicle in neutral and raise it on a hoist. Make a line across both the pinion flange and propeller shaft flange. Take out the flange bolts, then glide the slip yoke away from the transmission/transfer case shaft and take away the propeller shaft. For installation, fit the slip yoke on top of the output shaft and match up the markings shown on the flanges. Make sure to install new flange bolts and tighten them to 115 Nm, worn out flange bolts should not be used. Install a Loctite patch with the new bolts when possible; if you cannot get new bolts, remove the old ones, clean them and coat the thread with Loctite 242.

OEM 2005 Dodge Durango Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Shafts found

View related parts
2005 Dodge Durango Drive Shaft Part Number: 52853851AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853851AD, 52853851AE
- Item Weight: 26.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853851AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2005 Dodge Durango Drive Shaft Part Number: 52853039AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853039AE, 52853039AC, 52853039AD
- Item Weight: 17.00 Pounds
- Item Dimensions: 81.1 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853039AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Drive Shaft Part Number: 52853017AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853017AC, 52853017AE, 52853017AD
- Item Weight: 28.80 Pounds
- Item Dimensions: 63.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853017AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Drive Shaft Part Number: 52123197AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123197AA, 52853038AC
- Item Weight: 15.40 Pounds
- Item Dimensions: 49.5 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123197AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Drive Shaft Part Number: 52123196AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853019AB, 52123196AA
- Item Weight: 16.70 Pounds
- Item Dimensions: 40.9 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123196AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Drive Shaft Part Number: 52853018AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853018AC, 52853018AD, 52853018AE
- Item Weight: 24.10 Pounds
- Item Dimensions: 83.2 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853018AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2005 Dodge Durango Drive Shaft Parts and Q&A

Q: How to Service and Repair a Drive Shaft for Rear on 2005 Dodge Durango?
A: Before servicing or repairing the rear propeller shaft, place the vehicle in neutral and raise it on a hoist. Make a line across both the pinion flange and propeller shaft flange. Take out the flange bolts, then glide the slip yoke away from the transmission/transfer case shaft and take away the propeller shaft. For installation, fit the slip yoke on top of the output shaft and match up the markings shown on the flanges. Make sure to install new flange bolts and tighten them to 115 Nm, worn out flange bolts should not be used. Install a Loctite patch with the new bolts when possible; if you cannot get new bolts, remove the old ones, clean them and coat the thread with Loctite 242.