How to Safely Service and Repair a Blower Motor Resistor on 2005 Dodge Grand Caravan?

Always wait for the rear blower motor resistor block to cool for five minutes if you had the blower motor running before you start service work. Disconnect the negative battery cable and afterwards disconnect the right quarter and right D-pillar trim panels from the quarter inner panel. After that, remove the resistor from the rear HVAC housing by taking out its two fasteners and disconnecting the wire link to the rear blower motor. Put the new rear blower motor resistor into the rear HVAC housing, fasten it with the two screws and tighten them until the wrench shows the reading of 2 N.m (17 in. lbs.). Attach the rear HVAC wire harness connector to the resistor, set the right quarter trim panel and right D-pillar trim panel back in place and then connect the negative battery cable.

OEM 2005 Dodge Grand Caravan Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2005 Dodge Grand Caravan Resistor Part Number: 68029175AA
$25.20 MSRP: $37.25
You Save: $12.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Blower Motor Resistor
- Replaces: 4885583AB, 4885583AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68029175AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Dodge Grand Caravan Resistor Part Number: 5019189AA
$75.86 MSRP: $96.17
You Save: $20.31 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; Blower Motor Resistor; Resistor Blower Motor
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 4.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019189AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Dodge Grand Caravan Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885482AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2005 Dodge Grand Caravan Blower Motor Resistor Parts and Q&A

Q: How to Safely Service and Repair a Blower Motor Resistor on 2005 Dodge Grand Caravan?
A: Always wait for the rear blower motor resistor block to cool for five minutes if you had the blower motor running before you start service work. Disconnect the negative battery cable and afterwards disconnect the right quarter and right D-pillar trim panels from the quarter inner panel. After that, remove the resistor from the rear HVAC housing by taking out its two fasteners and disconnecting the wire link to the rear blower motor. Put the new rear blower motor resistor into the rear HVAC housing, fasten it with the two screws and tighten them until the wrench shows the reading of 2 N.m (17 in. lbs.). Attach the rear HVAC wire harness connector to the resistor, set the right quarter trim panel and right D-pillar trim panel back in place and then connect the negative battery cable.