Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
Item Weight: 0.50 Pounds
Item Dimensions: 1.5 x 2.8 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4799061AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, Sport, TRX4, WS | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
2005 Dodge Ram 1500 Speed Sensor Parts and Q&A
Q: How to Service and Repair a Transmission Speed Sensor for Output on 2005 Dodge Ram 1500?
A: To work on the transmission speed sensor, lift the car up safely before putting a fitting catch pan under the transmission. After disconnecting the wiring connector from output speed sensor 1, take the bolt out which secures the sensor to the case and remove the sensor. Install the output speed sensor 1 inside the transmission case and then fix it with the bolt, turning it to 11.9 Nm (105 inch lbs.). Attach the wiring connector to output speed sensor 1, make sure the fluid is sufficient and top up the fluid as required before bring the vehicle back to the ground.