Other Name: Module - Anti-Lock Brake; ABS Modulator Valve; ABS Control Module; Hydraulic Hose; Brake Hose; ABS Control Unit; Control Unit Anti-Lock Brake
Item Weight: 2.30 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 52010035AN
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2005 Dodge Ram 1500 Submodels:
SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2005 Dodge Ram 1500 Submodels:
SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
2005 Dodge Ram 1500 ABS Control Module Parts and Q&A
Q: How to Service and Repair an ABS Control Module on 2005 Dodge Ram 1500?
A: Service the Electronic Brake Control Module by disconnecting the negative battery cable first. Pull up the ABM harness connector release to make it come loose and after that, remove the bolts that hold the ABM mount. Then, disconnect the pump from the ABM and remove the ABM out of the HCU. It is necessary to reprogram any new ABM installed using a DRB. Install the ABM into the HCU, relink the pump connector to the ABM and tighten the 2 mounting bolts using your torque wrench to 2 N.m (16 in.lbs.). Next, connect the wiring harness to the ABM and push down on the release to make sure it is secure and finally attach the negative battery cable to the battery.