How Does Wheelhouse Assist in Servicing and Repairing the Rear Fender Liner on 2005 Dodge Viper?

Before servicing or repairing the rear fender liner, remove the rear wheel. Once that's done, take out the screws holding the rear shield, then remove the screws on the front shield to take it off. For installation, set the front shield onto the car and loosely screw in the outside screws. Next, attach the rear shield to the vehicle and put all the other screws in loosely. After that, fasten together the two shields by securing the five middle screws and then fasten all the rest.

OEM 2005 Dodge Viper Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wheelhouses found

View related parts
2005 Dodge Viper Fender Liner Extension, Front Passenger Side Part Number: 4865724AB
$75.74 MSRP: $91.75
You Save: $16.01 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Extension Panel, Front Right; Inner Support; Shield Splash
- Position: Front Passenger Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 14.1 x 11.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865724AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2005 Dodge Viper Splash Shield, Rear Driver Side Part Number: 4865649AE
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left, Rear Left Upper; Shield Splash
- Position: Rear Driver Side
- Replaces: 4865649AC, 4865649AD
- Item Weight: 2.40 Pounds
- Item Dimensions: 26.8 x 20.8 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865649AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.3L V10
View related parts
2005 Dodge Viper Fender Liner, Rear Driver Side Part Number: 4865491AC
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Left, Rear Left; Shield Splash; Fender Splash Shield
- Position: Rear Driver Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 33.4 x 22.6 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865491AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2005 Dodge Viper Splash Shield, Rear Lower Passenger Side Part Number: 4865646AD
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right Lower; Shield Splash
- Position: Rear Lower Passenger Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 34.3 x 21.6 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865646AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2005 Dodge Viper Splash Shield, Rear Upper Passenger Side Part Number: 4865648AE
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right, Rear Right Upper; Shield Splash
- Position: Rear Upper Passenger Side
- Replaces: 4865648AC, 4865648AD
- Item Weight: 2.80 Pounds
- Item Dimensions: 27.3 x 21.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865648AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.3L V10
View related parts
2005 Dodge Viper Fender Liner, Front Passenger Side Part Number: 4865490AC
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Right, Rear Right; Shield Splash; Fender Splash Shield
- Position: Front Passenger Side
- Item Weight: 2.90 Pounds
- Item Dimensions: 36.4 x 21.1 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865490AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2005 Dodge Viper Splash Shield, Rear Lower Driver Side Part Number: 4865647AD
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left Lower; Shield Splash
- Position: Rear Lower Driver Side
- Item Weight: 3.00 Pounds
- Item Dimensions: 52.0 x 23.6 x 16.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865647AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2005 Dodge Viper Fender Liner Extension, Front Driver Side Part Number: 4865725AB
Product Specifications
- Other Name: Shield - Splash; Fender Extension Panel, Front Left; Inner Support; Shield Splash
- Position: Front Driver Side
- Item Weight: 1.20 Pounds
- Item Dimensions: 54.6 x 15.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865725AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2005 Dodge Viper Wheelhouse Parts and Q&A

Q: How Does Wheelhouse Assist in Servicing and Repairing the Rear Fender Liner on 2005 Dodge Viper?
A: Before servicing or repairing the rear fender liner, remove the rear wheel. Once that's done, take out the screws holding the rear shield, then remove the screws on the front shield to take it off. For installation, set the front shield onto the car and loosely screw in the outside screws. Next, attach the rear shield to the vehicle and put all the other screws in loosely. After that, fasten together the two shields by securing the five middle screws and then fasten all the rest.