How to Service and Repair an Axle Shaft on 2005 Jeep Liberty?

For service or repairs on the axle shaft, start by shifting into neutral, using a hoist and then removing the cover on the differential housing to drain any fluid. Turn the differential case around so you can reach the pinion mate shaft lock screw which you should remove before removing the pinion mate shaft from the differential case. Bring the axle shaft inward until the lock at C-lock comes loose, then pull the assembly from the side gear and axle. The installation process is to apply gear lubricant to the bearing and seal, push the axle shaft through the seal and bearing and engage it with the side gear splines. Place the C-lock onto the axle shaft end and then push the axle shaft out so the C-lock seats properly in the side gear. The next step is to place the pinion mate shaft in the differential through thrust washers and differential pinions and ensure that the two holes are lined up properly. Use Loctite on the threads of the lock screw, then tighten them with 11 Nm of torque. Please reinstall the differential cover and rear brake parts once all is finished.

OEM 2005 Jeep Liberty Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Axle Shafts found

View related parts
2005 Jeep Liberty Axle Shaft, Rear Part Number: 52114416AB
$397.80 MSRP: $604.00
You Save: $206.20 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear
- Position: Rear
- Item Weight: 19.00 Pounds
- Item Dimensions: 34.2 x 9.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114416AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty Axle Shafts, Front Inner Part Number: 5066057AB
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front Inner; Inner Shaft; Shaft Axle; Axle Shaft
- Position: Front Inner
- Item Weight: 5.50 Pounds
- Item Dimensions: 17.4 x 1.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066057AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty Axle Shaft Assembly, Front Passenger Side Part Number: 52111780AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Axle Assembly; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Replaces: 5066022AA
- Item Weight: 20.00 Pounds
- Item Dimensions: 28.9 x 5.9 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111780AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- Limited, Sport | 2.4L L4, 2.8L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL
View related parts
2005 Jeep Liberty Axle Shaft Assembly, Front Driver Side Part Number: 52111781AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Axle Assembly; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 5066023AA
- Item Weight: 20.40 Pounds
- Item Dimensions: 27.4 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111781AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- Limited, Sport | 2.4L L4, 2.8L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL
View related parts
2005 Jeep Liberty Axle Shaft Assembly, Front Passenger Side Part Number: 52111778AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; CV Axle Assembly; Axle Shaft; Axle Assembly
- Position: Front Passenger Side
- Replaces: 5066020AA
- Item Weight: 20.60 Pounds
- Item Dimensions: 27.7 x 5.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111778AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty Axle Shaft Assembly, Front Driver Side Part Number: 52111779AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; CV Axle Assembly; Axle Shaft; Axle Assembly
- Position: Front Driver Side
- Replaces: 5066021AA
- Item Weight: 19.70 Pounds
- Item Dimensions: 29.1 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111779AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty Axle Shaft, Rear Part Number: 52070350AB
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Rear; Axle Shafts; Shaft Axle
- Position: Rear
- Item Weight: 10.60 Pounds
- Item Dimensions: 34.9 x 6.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52070350AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2005 Jeep Liberty Axle Shaft Parts and Q&A

Q: How to Service and Repair an Axle Shaft on 2005 Jeep Liberty?
A: For service or repairs on the axle shaft, start by shifting into neutral, using a hoist and then removing the cover on the differential housing to drain any fluid. Turn the differential case around so you can reach the pinion mate shaft lock screw which you should remove before removing the pinion mate shaft from the differential case. Bring the axle shaft inward until the lock at C-lock comes loose, then pull the assembly from the side gear and axle. The installation process is to apply gear lubricant to the bearing and seal, push the axle shaft through the seal and bearing and engage it with the side gear splines. Place the C-lock onto the axle shaft end and then push the axle shaft out so the C-lock seats properly in the side gear. The next step is to place the pinion mate shaft in the differential through thrust washers and differential pinions and ensure that the two holes are lined up properly. Use Loctite on the threads of the lock screw, then tighten them with 11 Nm of torque. Please reinstall the differential cover and rear brake parts once all is finished.