How to Remove and Install a Clutch Master Cylinder on 2006 Chrysler Crossfire?

Wear protective equipment and hold the brake fluid when dismounting the clutch master cylinder. Lift out the driver side lower instrument panel, clamp the supply hose and take it out. Take off the springs of the clutch, circlips, and nuts. Counter-clockwise, remove the cylinder then reinstall and connect parts, and bleed the system.

OEM 2006 Chrysler Crossfire Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Master Cylinder found

View related parts
2006 Chrysler Crossfire Hydraulic Assembly Part Number: 5098009AA
Product Specifications
- Other Name: Hydraulic Control - Clutch Actuator; Hydraulic Control Clutch Actuator
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.1 x 1.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098009AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Clutch Master Cylinder Parts and Q&A

Q: How to Remove and Install a Clutch Master Cylinder on 2006 Chrysler Crossfire?
A: Wear protective equipment and hold the brake fluid when dismounting the clutch master cylinder. Lift out the driver side lower instrument panel, clamp the supply hose and take it out. Take off the springs of the clutch, circlips, and nuts. Counter-clockwise, remove the cylinder then reinstall and connect parts, and bleed the system.