JeepParts
My Garage
My Account
Cart
OEM 2006 Chrysler Pacifica Rocker Arm
Engine Rocker Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Rocker Arms found
2006 Chrysler Pacifica Exhaust Rocker Arms Part Number: 4663996
$73.76 MSRP: $113.00You Save: $39.24 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663996
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Chrysler Pacifica Rocker Arms Part Number: 4781183AA
$90.41 MSRP: $134.00You Save: $43.59 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Arm - Intake; Rocker Arm; Rocker Arm Intake
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781183AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Chrysler Pacifica Rocker Arms Part Number: 4781182AA
$110.86 MSRP: $165.00You Save: $54.14 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Chrysler Pacifica Intake Rocker Arm Part Number: 4573460
$44.50 MSRP: $90.25You Save: $45.75 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Right Intake Rocker; Rocker Arm Intake
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4573460
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Chrysler Pacifica Intake Rocker Arm Part Number: 4573459
$44.50 MSRP: $90.25You Save: $45.75 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Left Intake Rocker; Rocker Arm Intake
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4573459
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Chrysler Pacifica Rocker Arm Parts and Q&A
- Q: How to Maintain and Fix a Rocker Arm on 2006 Chrysler Pacifica?A: Service and repair of the rocker arm assembly require removing the cylinder head covers and locating the rocker arm assembly and its rocker arms. Loosen the bolts holding the rocker arm assembly in place, then take out the assembly. Make sure you do not turn it over, as this can pull air into the lash adjusters. Start by removing the rocker arm and shafts, then withdraw the dowel pin with a 4 mm screw, nut, spacer and washer, so as not to reuse the pin. Check if the rocker arm mounting part of the shafts is damaged and, if so, clean the oil holes in the shafts to prevent clogs. The intake and exhaust rocker arms are distinct, so identify them before the disassembly and inspect for roller scuffs, wear in the bore, missing pads, cracks and protruding axles. If you spot these, change the assembly. Keep the lash adjuster attached to the rocker arm to prevent harm during installation. As you fix the system, fit the shaft with fresh dowel pins, rocker arms and pedestals, ensuring the pins are pushed all the way in to the rocker shaft in the pedestals. While it is possible to set up the rocker arm and shaft before the cylinder head, most engine builders do it after. Place the camshafts in the neutral point to lower valve spring load and be sure the rocker arm and shaft assembly has the identification marks facing forward for the left head and toward the back for the right head as you install it. Firmly bolt each rocker arm/shaft in turn to 31 Nm (275 inch lbs.) and put the cylinder head covers into place.
Related 2006 Chrysler Pacifica Parts
2006 Chrysler Pacifica Oil Filter Housing
2006 Chrysler Pacifica Oil Pan
2006 Chrysler Pacifica Timing Belt
2006 Chrysler Pacifica Camshaft
2006 Chrysler Pacifica Camshaft Seal
2006 Chrysler Pacifica Camshaft Thrust Plate
2006 Chrysler Pacifica Crankshaft
2006 Chrysler Pacifica Crankshaft Thrust Washer Set
2006 Chrysler Pacifica Crankshaft Timing Gear
2006 Chrysler Pacifica Oil Pump Gasket
2006 Chrysler Pacifica Rod Bearing
2006 Chrysler Pacifica Timing Belt Tensioner