How to Service the A/C Switch on 2006 Chrysler Sebring?

For vehicles with air bags, first unconnect and isolate the negative battery terminal, then make sure you wait two minutes to allow all air bag capacitors to discharge. Turn off the ignition, remove the negative battery cable and after that, carefully pop the center bezel from the instrument panel. With the center bezel on your workbench, detach the six screws from the A/C-heater control. After that, take out the control. Install the A/C-heater control by releasing the retaining clips around the instrument panel, placing the control into the center of the bezel and securing it with six screws tightened to 2 N.m (17 in. lbs.). At the end, fit the instrument panel center bezel and attach the battery negative wire.

OEM 2006 Chrysler Sebring A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Switches found

View related parts
2006 Chrysler Sebring Heater Control Part Number: 4596277AB
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.5 x 5.7 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596277AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Heater Control Part Number: 4698199AG
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 4698199AD, 4698199AC, 4698199AB, 4698199AF, 4698199AE
- Item Weight: 1.50 Pounds
- Item Dimensions: 10.0 x 3.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4698199AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring A/C Switch Parts and Q&A

Q: How to Service the A/C Switch on 2006 Chrysler Sebring?
A: For vehicles with air bags, first unconnect and isolate the negative battery terminal, then make sure you wait two minutes to allow all air bag capacitors to discharge. Turn off the ignition, remove the negative battery cable and after that, carefully pop the center bezel from the instrument panel. With the center bezel on your workbench, detach the six screws from the A/C-heater control. After that, take out the control. Install the A/C-heater control by releasing the retaining clips around the instrument panel, placing the control into the center of the bezel and securing it with six screws tightened to 2 N.m (17 in. lbs.). At the end, fit the instrument panel center bezel and attach the battery negative wire.