Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
Item Weight: 1.40 Pounds
Item Dimensions: 4.5 x 5.7 x 12.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4596277AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
2005 Chrysler Sebring A/C Switch Parts and Q&A
Q: How to Service the A/C Switch on 2005 Chrysler Sebring?
A: To work on the control assembly, first unplug the negative cable from the battery and wait two minutes for the system to drain. The first thing to do is separate and disconnect the negative battery cable. After that, take the center bezel from the instrument panel and put it on a workbench to remove the six screws that hold the A/C-heater control in place. Slide the A/C-heater control back into the center bezel and secure it there with six screws, tightening each to 17 in. lbs. After that, put the center bezel back into the instrument panel and reattach the negative battery cable.