How to Properly Remove and Install a Windshield on 2006 Dodge Dakota?

To take off the windshield, check warnings, loosen side molding, rear picture mirror, cowl grille, a-pillar trim, then take off the headliner. Separate the adhesive using a cut-out wire, and then remove the windshield carefully. To be installed, urethane should be left to dry after 24 hours and adhesive application procedures should be pursued.

OEM 2006 Dodge Dakota Windshield

Glass Windshield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield found

View related parts
2006 Dodge Dakota Windshield, Front Part Number: 5139096AB
Product Specifications
- Other Name: Windshield Glass, Front
- Position: Front
- Replaces: 5139096AA
- Item Weight: 45.30 Pounds
- Item Dimensions: 70.7 x 50.0 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139096AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Dakota Windshield Parts and Q&A

Q: How to Properly Remove and Install a Windshield on 2006 Dodge Dakota?
A: To take off the windshield, check warnings, loosen side molding, rear picture mirror, cowl grille, a-pillar trim, then take off the headliner. Separate the adhesive using a cut-out wire, and then remove the windshield carefully. To be installed, urethane should be left to dry after 24 hours and adhesive application procedures should be pursued.