How to Change an Oil Filter on 2006 Dodge Durango?

Before you change the oil filter, put a drain pan beneath the filter. Use appropiate oil filter wrench to relax the filter, afterwards please rotate it anti-clockwise and take off the filter from the cylinder block oil filter boss. As soon as the filter separates from the filter case, flip the gasket end upward to avoid dripping any oil and also remove the entire filter and its gasket from the vehicle. Use a wiping cloth to clean the gasket sealing surface. Gently lubricate the oil filter gasket with engine oil, then place the filter over the adapter nipple beneath the cover and turn to screw it in place. After the gasket touches the seal, tighten the filter by hand only one full turn, not any tighter. Add the last drop of oil, make certain the crankcase is filled, switch on the engine and check for leaks.

OEM 2006 Dodge Durango Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2006 Dodge Durango Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Durango Oil Filter Part Number: 4781452BF
$14.57
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 4781452BB, 4781452BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781452BF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2006 Dodge Durango Oil Filter Parts and Q&A

Q: How to Change an Oil Filter on 2006 Dodge Durango?
A: Before you change the oil filter, put a drain pan beneath the filter. Use appropiate oil filter wrench to relax the filter, afterwards please rotate it anti-clockwise and take off the filter from the cylinder block oil filter boss. As soon as the filter separates from the filter case, flip the gasket end upward to avoid dripping any oil and also remove the entire filter and its gasket from the vehicle. Use a wiping cloth to clean the gasket sealing surface. Gently lubricate the oil filter gasket with engine oil, then place the filter over the adapter nipple beneath the cover and turn to screw it in place. After the gasket touches the seal, tighten the filter by hand only one full turn, not any tighter. Add the last drop of oil, make certain the crankcase is filled, switch on the engine and check for leaks.