How to Service an Oil Filter on 2005 Dodge Durango?

Attach a drain pan below the oil filter before starting the work. Place a suitable wrench on the filter and rotate it in the other direction (clockwise) to disconnect the filter from the cylinder block boss. After the filter is separated, tip the oily end upward, then lift the filter so oil does not spill on the car and take it out, making sure the filter gasket removes with the filter. Open the cap, wipe away any oil or dirt from the gasket surface and then close the cap. Put a small amount of engine oil on the oil filter gasket and thread the filter onto the adapter nipple. When the gasket is positioned on the surface, turn the filter one complete turn before stopping. Afterward, add the oil, check the crankcase to make sure it is not too high or low and check for leaks while starting the engine.

OEM 2005 Dodge Durango Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2005 Dodge Durango Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2005 Dodge Durango Oil Filter Part Number: 4781452BF
$14.57
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 4781452BB, 4781452BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781452BF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS

2005 Dodge Durango Oil Filter Parts and Q&A

Q: How to Service an Oil Filter on 2005 Dodge Durango?
A: Attach a drain pan below the oil filter before starting the work. Place a suitable wrench on the filter and rotate it in the other direction (clockwise) to disconnect the filter from the cylinder block boss. After the filter is separated, tip the oily end upward, then lift the filter so oil does not spill on the car and take it out, making sure the filter gasket removes with the filter. Open the cap, wipe away any oil or dirt from the gasket surface and then close the cap. Put a small amount of engine oil on the oil filter gasket and thread the filter onto the adapter nipple. When the gasket is positioned on the surface, turn the filter one complete turn before stopping. Afterward, add the oil, check the crankcase to make sure it is not too high or low and check for leaks while starting the engine.