How to Maintain a Rear Wheel Speed Sensor on 2006 Dodge Ram 2500?

The rear wheel speed sensor should be serviced while the vehicle is on a hoist. Pull out the brake line mounting nut and take the brake line off the stud on the sensor. Then, carefully grab the mounting stud and lift it out from under the sensor and shield and then remove the shield and sensor from their place in the differential housing. Take away the sensor wire harness and detach the sensor. Link the harness to the sensor and make certain the seal fits securely between the sensor and the wiring connector. Should the O-ring be missing, put it back in its position on the sensor. Insert the differential sensor first and later install the sensor shield. Attach the sensor to the mounting stud, then tighten the stud to 24 Nm. Join the brake line to the sensor stud, add the nut and only after that lower the vehicle.

OEM 2006 Dodge Ram 2500 Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2006 Dodge Ram 2500 Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Base, Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 2500 Speed Sensor, Rear Part Number: 5032220AC
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Speed Sensor
- Position: Rear
- Replaced by: 5032220AD
- Replaces: 5032220AA, 5032220AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5032220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Sensor - Wheel Speed Part Number: 5032220AD
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- SKU: 5032220AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS

2006 Dodge Ram 2500 Speed Sensor Parts and Q&A

Q: How to Maintain a Rear Wheel Speed Sensor on 2006 Dodge Ram 2500?
A: The rear wheel speed sensor should be serviced while the vehicle is on a hoist. Pull out the brake line mounting nut and take the brake line off the stud on the sensor. Then, carefully grab the mounting stud and lift it out from under the sensor and shield and then remove the shield and sensor from their place in the differential housing. Take away the sensor wire harness and detach the sensor. Link the harness to the sensor and make certain the seal fits securely between the sensor and the wiring connector. Should the O-ring be missing, put it back in its position on the sensor. Insert the differential sensor first and later install the sensor shield. Attach the sensor to the mounting stud, then tighten the stud to 24 Nm. Join the brake line to the sensor stud, add the nut and only after that lower the vehicle.