How Should You Properly Service and Repair a Brake Line on 2006 Dodge Ram 2500?

A brake tube made from preformed metal brake is preferred, but double-wall steel tube can act as a substitute replacement when no official metal brake tube is available. Use a Tubing Cutter to trim away the torn section and afterward use a reamer on the cut edges for a proper flare. Put the replacement tube nut onto the tube and then put it into the flaring tool. Put the gauge form over the tube end and keep pushing it through the flaring tool jaws so it contacts the part of the gauge that corresponds with the diameter of your tube. Screw the tool bar firmly down the tube, slide the plug into the gauge, place the disc directly over the gauge and move the tapered flaring screw into the recess in the middle of the disc. Tighten the handle so the plug gauge touches the flaring tool squarely; this will begin the inverted flare and you can then remove the gauge and do the full flare. To do ISO flaring, cut the old tube with a Tubing Cutter, remove the burrs from its inside and screw on the tube nut. Use the flaring tool and put the tube inside so it is flush at the top, then tighten the tool bar onto the tube. Set the appropriate adaptor onto the threaded end of the flaring tool, apply grease to the flare end, put the adaptor and yoke screw over the tube and tighten the yoke screw until it fits securely on the bar.

OEM 2006 Dodge Ram 2500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Lines found

View related parts
2006 Dodge Ram 2500 Flex Hose, Front Passenger Side Part Number: 52010312AE
$69.74 MSRP: $103.00
You Save: $33.26 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose Brake Right Front; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 52010312AC, 52010312AD
- Item Weight: 1.00 Pounds
- Item Dimensions: 34.3 x 3.1 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010312AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Flex Hose, Front Driver Side Part Number: 52010313AG
$78.97 MSRP: $117.00
You Save: $38.03 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose Brake Left Front With Junction Block; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 52010313AC, 52010313AF, 52010313AE
- Item Weight: 1.60 Pounds
- Item Dimensions: 34.1 x 6.9 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010313AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Flex Hose, Rear Driver Side Part Number: 52121635AF
$47.33 MSRP: $71.65
You Save: $24.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: 52121635AC, 52121635AE
- Item Weight: 0.70 Pounds
- Item Dimensions: 18.5 x 4.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121635AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Flex Hose, Rear Passenger Side Part Number: 52121634AG
$53.89 MSRP: $80.15
You Save: $26.26 (33%)
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Passenger Side
- Replaces: 52121634AF, 52121634AB, 52121634AC, 52121634AD, 52121634AE
- Item Weight: 2.70 Pounds
- Item Dimensions: 25.2 x 13.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121634AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Flex Hose, Front Driver Side Part Number: 52010311AF
$84.69 MSRP: $120.00
You Save: $35.31 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose Brake Left Front With Junction Block; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 52010311AB, 52010311AE, 52010311AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 20.7 x 6.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010311AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Flex Hose, Rear Center Part Number: 52121118AD
$601.12 MSRP: $911.00
You Save: $309.88 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Rear Center; Hydraulic Hose; Brake Hose; Brake Line; Hose
- Position: Rear Center
- Replaces: 52121118AC, 52121118AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 22.0 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121118AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Brake Hose Part Number: 52010336AB
Product Specifications
- Other Name: Tube - Hydro Boost Gear Portion; Brake Hydraulic Line; Brake Line; Tube; Tube Assembly Hydro Boost Gear Portion; Tube Brake
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.3 x 3.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010336AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Brake Tube Part Number: 52010337AB
Product Specifications
- Other Name: Tube - Hydro Boost Pump Portion; Brake Hydraulic Line; Brake Line; Tube; Tube Assembly Hydro Boost Pump Portion; Tube Brake
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.2 x 6.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010337AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Vacuum Hose Part Number: 4581635AF
$159.75 MSRP: $238.00
You Save: $78.25 (33%)
Product Specifications
- Other Name: Hose - Brake Booster Vacuum; Brake Hydraulic Line; Brake Vacuum Hose; Brake Booster Vacuum Hose; Brake Line; Brake Hose; Reservoir Hose; Hose Brake Booster Vacuum
- Replaces: 4581635AB, 52010339AD, 68445722AA, 4581635AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4581635AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Flex Hose, Front Passenger Side Part Number: 52010310AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose Brake Right Front; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 52010310AB, 52010310AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 20.7 x 3.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010310AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS

2006 Dodge Ram 2500 Brake Line Parts and Q&A

Q: How Should You Properly Service and Repair a Brake Line on 2006 Dodge Ram 2500?
A: A brake tube made from preformed metal brake is preferred, but double-wall steel tube can act as a substitute replacement when no official metal brake tube is available. Use a Tubing Cutter to trim away the torn section and afterward use a reamer on the cut edges for a proper flare. Put the replacement tube nut onto the tube and then put it into the flaring tool. Put the gauge form over the tube end and keep pushing it through the flaring tool jaws so it contacts the part of the gauge that corresponds with the diameter of your tube. Screw the tool bar firmly down the tube, slide the plug into the gauge, place the disc directly over the gauge and move the tapered flaring screw into the recess in the middle of the disc. Tighten the handle so the plug gauge touches the flaring tool squarely; this will begin the inverted flare and you can then remove the gauge and do the full flare. To do ISO flaring, cut the old tube with a Tubing Cutter, remove the burrs from its inside and screw on the tube nut. Use the flaring tool and put the tube inside so it is flush at the top, then tighten the tool bar onto the tube. Set the appropriate adaptor onto the threaded end of the flaring tool, apply grease to the flare end, put the adaptor and yoke screw over the tube and tighten the yoke screw until it fits securely on the bar.