How to Service and Repair a Brake Master Cylinder with Hydroboost on 2006 Dodge Ram 3500?

Start by taking the brake lines off the brake master cylinder to perform a hydroboost service and repair. Connectivity guide 3 - After that, take out the attachment for the low fluid level and remove the brake master cylinder's four mounting nuts. If you do not want to pull the output rod out, ensure you move the brake master cylinder straight forward and not to the side. Once you have a new brake master cylinder, you should bleed it before you install it. Attach the new brake master cylinder onto the booster studs, screw in the new mounting nuts and tighten them to 25 Nm (221 inch lbs.). After that, fix the brake lines back in place and tighten them to 19 Nm (170 inch lbs.). After that, secure the electrical connector for the low fluid level switch and add and move the fluid in the main brake reservoir.

OEM 2006 Dodge Ram 3500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Master Cylinders found

View related parts
2006 Dodge Ram 3500 Master Cylinder Part Number: 5093408AA
Product Specifications
- Other Name: Motor Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.3 x 6.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093408AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 3500 Master Cylinder Part Number: 5179892AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 3.70 Pounds
- Item Dimensions: 11.9 x 11.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179892AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 3500 Master Cylinder Part Number: 5080888AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.1 x 9.7 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080888AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 10 Cyl 8.0 L GAS, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2006 Dodge Ram 3500 Brake Master Cylinder Parts and Q&A

Q: How to Service and Repair a Brake Master Cylinder with Hydroboost on 2006 Dodge Ram 3500?
A: Start by taking the brake lines off the brake master cylinder to perform a hydroboost service and repair. Connectivity guide 3 - After that, take out the attachment for the low fluid level and remove the brake master cylinder's four mounting nuts. If you do not want to pull the output rod out, ensure you move the brake master cylinder straight forward and not to the side. Once you have a new brake master cylinder, you should bleed it before you install it. Attach the new brake master cylinder onto the booster studs, screw in the new mounting nuts and tighten them to 25 Nm (221 inch lbs.). After that, fix the brake lines back in place and tighten them to 19 Nm (170 inch lbs.). After that, secure the electrical connector for the low fluid level switch and add and move the fluid in the main brake reservoir.