How to Effectively Remove and Install a Satellite Antenna on 2006 Jeep Commander?

Before eliminating the satellite antenna, you must first pull out the battery's negative lead from the car. Raise the front of the interior and lower the back to access the antenna's underside, then detach the wire harness connectors from it. Get rid of the fastener and its retainer. Depress one retaining tab on the roof antenna from within the vehicle and gently raise the antenna connector through the panel on one side. Firmly press the side of the connector opposite the button to release and take out the antenna. To set up the installation, push the wire harness into the hole prepared in the roof panel and press the antenna until both retainers snap in place. Once you've attached the wire harness connectors, insert and tighten the holding clip for the antenna, put back the headliner and connect the negative battery lead.

OEM 2006 Jeep Commander Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Antennas found

View related parts
2006 Jeep Commander Satellite Ant Part Number: 5064724AA
$91.60 MSRP: $149.00
You Save: $57.40 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna - Satellite; Satellite Radio Antenna; Radio Antenna Assembly; GPS Antenna Assembly; Radio Antenna Mast; Antenna; Antenna Satellite
- Replaces: 5091504AB, 5150048AA, 5150048AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.2 x 6.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064724AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Antenna Mast, Black Part Number: 56038725AC
$26.33 MSRP: $40.05
You Save: $13.72 (35%)
ADD TO CART
Product Specifications
- Other Name: Mast - Antenna; Radio Antenna Mast; Mast; Mast Antenna - Fixed; Mast Antenna
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 6.4 x 37.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038725AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Antenna Base Part Number: 56038790AD
Product Specifications
- Other Name: Base - Antenna; Radio Antenna Base; Base; Base Antenna Base And Cable; Base Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.6 x 6.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038790AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Antenna Part Number: 56038799AB
Product Specifications
- Other Name: Antenna Global Positioning
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.6 x 6.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038799AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Antenna Parts and Q&A

Q: How to Effectively Remove and Install a Satellite Antenna on 2006 Jeep Commander?
A: Before eliminating the satellite antenna, you must first pull out the battery's negative lead from the car. Raise the front of the interior and lower the back to access the antenna's underside, then detach the wire harness connectors from it. Get rid of the fastener and its retainer. Depress one retaining tab on the roof antenna from within the vehicle and gently raise the antenna connector through the panel on one side. Firmly press the side of the connector opposite the button to release and take out the antenna. To set up the installation, push the wire harness into the hole prepared in the roof panel and press the antenna until both retainers snap in place. Once you've attached the wire harness connectors, insert and tighten the holding clip for the antenna, put back the headliner and connect the negative battery lead.