How to Remove and Install a MAP Sensor on 2006 Jeep Commander?

The MAP sensor stands up front in the intake manifold and must be dealt with correctly for installation and removal. First, take out the electrical connector from the MAP sensor and after that, clean the space where the sensor is positioned. After that, take the sensor mounting screws out and pull the MAP sensor from the intake manifold to check the O-ring. Once you start installation, you should first clean the MAP sensor mounting hole and inspect the O-ring to make sure it is whole. Place the sensor into the manifold, install all the mounting bolts and attach the electrical connector, following the b dose height of the bolts recommended by the manufacturer.

OEM 2006 Jeep Commander MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2006 Jeep Commander M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Jeep Commander M.A.P. Sensor Part Number: 56028562AB
$31.84 MSRP: $45.80
You Save: $13.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028562AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- Limited | 8 Cyl 5.7 L GAS

2006 Jeep Commander MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on 2006 Jeep Commander?
A: The MAP sensor stands up front in the intake manifold and must be dealt with correctly for installation and removal. First, take out the electrical connector from the MAP sensor and after that, clean the space where the sensor is positioned. After that, take the sensor mounting screws out and pull the MAP sensor from the intake manifold to check the O-ring. Once you start installation, you should first clean the MAP sensor mounting hole and inspect the O-ring to make sure it is whole. Place the sensor into the manifold, install all the mounting bolts and attach the electrical connector, following the b dose height of the bolts recommended by the manufacturer.