How to Remove the MAP Sensor from the Intake Manifold on Jeep Commander?

The front of the intake manifold houses the Manifold Absolute Pressure (MAP) sensor. First, disconnect the electrical cable from the MAP sensor, then clean everything near the sensor. Next, unlatch the two sensor screws on the manifold and remove the MAP sensor. After that, examine the state of the sensor O-ring.

How to Install a MAP Sensor in the Intake Manifold on Jeep Commander?

To keep the seal on Manifold Absolute Pressure sensor, it is secured in place at the front of the intake manifold by an O-ring. Wipe the hole in the intake manifold where the MAP sensor is mounted and then look at the O-ring for any damage. Insert the sensor into the manifold and mount the MAP sensor bolts according to the manufacturer's instructions for torque. Place the electrical connector onto the battery to finish the job.

OEM Jeep Commander MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 MAP Sensors found

View related parts
Jeep Commander M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander M.A.P. Sensor Part Number: 56028562AB
$31.84 MSRP: $45.80
You Save: $13.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | Limited | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

Jeep Commander MAP Sensor

Choose OEM MAP Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander MAP Sensor is known as one of the vital parts for the car and is highly appreciated for its durability and effectiveness for a range of Jeep Commander models. Its size though is very small is very powerful, and it is used to measure the positive air pressure which enters the intake manifold through the use of sensor data which is relayed to the engine control unit. With the help of the MAP sensor, air volume in the cylinders is measured and sent to the ECU for adjustment of the fuel injectors, therefore allowing the engine to have proper combustion of air-fuel mixture with increased engine power and efficiency. Suitable for both normally aspirated and turbo charged/procharged Jeep Commander engines, the MAP Sensor supplies accurate manifold pressure information necessary for proper fuel delivery and spark/timing control. This precision thus helps the Jeep Commander perform to the optimum thus resulting in enhanced safety and the drive feel. The Jeep Commander MAP Sensor can be named one of the most popular products in the automotive market as this unit has a possibility to measure absolute pressure, and that provides only the positive values while functioning, unlike such boost sensors. Being incorporated in the Jeep Commander model, this MAP Sensor is necessary for achieving the required performance levels, which is why it is appreciated by Jeep lovers. Situated in either the XK or the brand new 2022 model, the Jeep Commander MAP Sensor is central for the vehicle's operation and performance of the vehicle, giving drivers a reliable and efficient trip every time they take their car for a spin.

Jeep Commander MAP Sensor Parts and Q&A

M.A.P. Sensor
56041018AD
Q: How to Remove the MAP Sensor from the Intake Manifold on Jeep Commander?
A:
The front of the Intake Manifold houses the Manifold Absolute Pressure (MAP) sensor. First, disconnect the electrical cable from the MAP sensor, then clean everything near the sensor. Next, unlatch the two sensor screws on the manifold and remove the MAP sensor. After that, examine the state of the sensor O-ring.
M.A.P. Sensor
68199324AB
Q: How to Install a MAP Sensor in the Intake Manifold on Jeep Commander?
A:
To keep the seal on Manifold Absolute Pressure sensor, it is secured in place at the front of the Intake Manifold by an O-ring. Wipe the hole in the intake manifold where the MAP sensor is mounted and then look at the O-ring for any damage. Insert the sensor into the manifold and mount the MAP sensor bolts according to the manufacturer's instructions for torque. Place the electrical connector onto the battery to finish the job.