How to Remove and Replace a Piston in an Engine on 2006 Jeep Commander?

To change the piston, disconnect the battery, take off the oil pan, and cylinder head(s). Ridge reamer may be used where necessary and then pistons and connecting rods are removed and labeled. Install piston rings, examine components without abrasives, and clean components. Confirm correct alignment and torque requirements on reassembling.

OEM 2006 Jeep Commander Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Pistons found

View related parts
2006 Jeep Commander Piston Part Number: 68233351AA
Product Specifications
- Replaces: 5012362AF, 5012362AE, 5012362AC, 5012362AD
- Item Weight: 3.00 Pounds
- Item Dimensions: 10.5 x 6.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68233351AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Jeep Commander Piston Part Number: 5086010AB
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod See Note; Piston Pin And Rod
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.9 x 5.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086010AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- Limited | 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Piston Part Number: 5086011AB
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.7 x 5.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086011AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- Limited | 8 Cyl 5.7 L GAS

2006 Jeep Commander Piston Parts and Q&A

Q: How to Remove and Replace a Piston in an Engine on 2006 Jeep Commander?
A: To change the piston, disconnect the battery, take off the oil pan, and cylinder head(s). Ridge reamer may be used where necessary and then pistons and connecting rods are removed and labeled. Install piston rings, examine components without abrasives, and clean components. Confirm correct alignment and torque requirements on reassembling.