How to Service and Repair a Steering Column Cover on 2006 Jeep Grand Cherokee?

The steering column cover can be serviced and repaired by first disconnect and isolate the negative battery cable. Tighten the three bolts and pull out the hush panel on the drivers side. Remove the opening cover by separating the upper clips with a trim stick C-4755 or equivalent, rotating the cover down exposing the lower hinges at the bottom and releasing the lower hinges. Spin the cover down on the carpet, hold the part at about the lower edge and draw up and aft with a jerking motion so as to snap out the lower hinge pins. To install, hinge the snap open covers of the lower steering column opening over the pivots and turn it up and take care that the upper fastener clips are seated. Insert the tabs in the front of the hush panel in the slots and tighten all of them by attaching the three screws.

OEM 2006 Jeep Grand Cherokee Steering Column Cover

Steering Column Cover Bezel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Column Covers found

View related parts
2006 Jeep Grand Cherokee Shroud, Slate Gray Part Number: 5KB11BD5AD
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover; Shroud Steering Column
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KB11BD5AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Shroud Part Number: 5KB11BD1AD
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover; Shroud Steering Column
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.1 x 7.2 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KB11BD1AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Shroud Part Number: 5KB11ZJ3AD
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover; Shroud Steering Column
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.1 x 8.9 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KB11ZJ3AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Lower Column Cover, Gray Part Number: 5HS93BD1AI
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Upper Column Cover
- Replaces: 5HS93BD1AH, 5HS93BD1AE, 5HS93BD1AF, 5HS93BD1AG
- Item Weight: 3.90 Pounds
- Item Dimensions: 25.3 x 14.7 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HS93BD1AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Lower Column Cover Part Number: 5HS93ZJ3AI
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Upper Column Cover
- Replaces: 5HS93ZJ3AG, 5HS93ZJ3AF, 5HS93ZJ3AE, 5HS93ZJ3AH
- Item Weight: 4.00 Pounds
- Item Dimensions: 25.0 x 14.2 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HS93ZJ3AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Lower Column Cover, Gray Part Number: 5HS93BD5AI
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Upper Column Cover
- Replaces: 5HS93BD5AF, 5HS93BD5AG, 5HS93BD5AH, 5HS93BD5AE
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HS93BD5AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Steering Column Cover Parts and Q&A

Q: How to Service and Repair a Steering Column Cover on 2006 Jeep Grand Cherokee?
A: The steering column cover can be serviced and repaired by first disconnect and isolate the negative battery cable. Tighten the three bolts and pull out the hush panel on the drivers side. Remove the opening cover by separating the upper clips with a trim stick C-4755 or equivalent, rotating the cover down exposing the lower hinges at the bottom and releasing the lower hinges. Spin the cover down on the carpet, hold the part at about the lower edge and draw up and aft with a jerking motion so as to snap out the lower hinge pins. To install, hinge the snap open covers of the lower steering column opening over the pivots and turn it up and take care that the upper fastener clips are seated. Insert the tabs in the front of the hush panel in the slots and tighten all of them by attaching the three screws.