How to service and repair a Rear Door Striker on 2006 Jeep Liberty?

Removing the rear door striker To remove the rear door striker, loosen the four bolts, disassemble the latch striker and the spacer. Installation requires that the striker and spacer be installed, bolts be installed and tightened to 28 N.m (21 ft.lbs.). Lastly, make adjustments as required on the door.

OEM 2006 Jeep Liberty Rear Door Striker

Rear Door Latch Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rear Door Strikers found

View related parts
2006 Jeep Liberty Striker, Front Part Number: 4878826AC
Product Specifications
- Other Name: Striker - Door; Liftgate Lock Striker Plate, Rear; Front & Rear Door Lock Striker Plates; Rear Tailgate Striker Plate; Striker Door
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.8 x 2.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4878826AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Striker, Front Part Number: 4780607AB
Product Specifications
- Other Name: Striker - Door; Lock Striker Plate & Pin, Front/Rear; Striker Door
- Position: Front
- Replaces: 4780607AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.9 x 2.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4780607AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2006 Jeep Liberty Rear Door Striker Parts and Q&A

Q: How to service and repair a Rear Door Striker on 2006 Jeep Liberty?
A: Removing the rear door striker To remove the rear door striker, loosen the four bolts, disassemble the latch striker and the spacer. Installation requires that the striker and spacer be installed, bolts be installed and tightened to 28 N.m (21 ft.lbs.). Lastly, make adjustments as required on the door.