Other Name: Hinge - Liftglass; Liftgate Glass Hinge, Rear Left; Liftgate Hinge; Door Hinge; Hinge Liftglass
Position: Rear Driver Side
Replaces: 5013723AA
Item Weight: 1.00 Pounds
Item Dimensions: 3.9 x 3.8 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5013723AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
Other Name: Hinge - Liftglass; Liftgate Glass Hinge, Rear Right; Liftgate Hinge; Door Hinge; Hinge Liftglass
Position: Rear Passenger Side
Replaces: 5013722AA
Item Weight: 1.10 Pounds
Item Dimensions: 3.8 x 3.9 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5013722AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
Other Name: Hinge - Door Half; Door Hinge, Front Right Upper; Hinge Door Half; Door Hinge
Position: Front Upper Passenger Side
Condition: New
Fitment Type: Direct Replacement
SKU: 55176368
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2006 Jeep Wrangler Submodels:
65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
2006 Jeep Wrangler Door Hinge Parts and Q&A
Q: How to Maintain and Fix a Door Hinge on 2006 Jeep Wrangler?
A: The first thing to do is take off the door, mark the hinge outline on the door with a grease pencil and then mark it on the body part as well. After that, unscrew the nut from the upper hinge pin, taking care not to throw away the hinge pin or the plastic shims. Next, get rid of the hinge-to-body and hinge-to-door screws to release the hinge from both the door and the body, holding it steady if the door gets in the way. The upper hinge is also used in the windshield mounting, so don't remove the windshield until you secure the windshield frame by means of an appropriate support tool. Before installing, clean the hinge surface with a correct cleaning solution, dry it with compressed air and paint it as close as possible to the vehicle's color. Spray the hinge with lubricant, put it onto the door, line it up with the pencil marks and fasten the hinge with the screws. After that, fit the hinge over the vehicle, mark it with the pencil and secure it in place with its screws prior to installing the door. Rotate the front wheels around for windshield alignment and then check the alignment of the doors, making any necessary modifications.