How to Remove and Install a Speed Sensor in Various Drivetrain Configurations on 2006 Jeep Wrangler?

The VSS position is the speedometer pinion gear adapter for all vehicles, with it being on the transfer case extension on the left for 4WD and on the transmission extension housing on the left for 2WD. The first step is to elevate the vehicle and next, push the slide tab to disconnect the electrical connector. Then, after placing the sensor where you want it, push on the secondary release lock to ease the connector out of the sensor. Then, unscrew the sensor mounting bolt and simply pull the sensor straight out from the pinion gear adapter, leaving the adapter on the transmission. Before placing the sensor into the adapter, clean the interior of the adapter, mount the sensor using the bolt and check that the sensor is tightly placed and even with the adapter. At last, tighten the sensor mounting bolt to 2.2 Nm (20 inch lbs.) and snap back the electrical connector.

OEM 2006 Jeep Wrangler Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2006 Jeep Wrangler Vehicle Speed Sensor Part Number: 56027905
Product Specifications
- Other Name: Sensor - Vehicle Speed; Sensor Vehicle Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 1.5 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027905
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler ABS Sensor, Rear Driver Side Part Number: 56027729AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor
- Position: Rear Driver Side
- Replaces: 56027729
- Item Weight: 1.20 Pounds
- Item Dimensions: 12.2 x 1.8 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027729AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler ABS Sensor, Front Driver Side Part Number: 56027727AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 56027727
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.2 x 2.3 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027727AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler ABS Sensor, Rear Passenger Side Part Number: 56027728AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Rear Right; Anti-Lock Braking System Sensor; ABS Wheel Speed Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: 56027728
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.6 x 9.3 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027728AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Speed Sensor Parts and Q&A

Q: How to Remove and Install a Speed Sensor in Various Drivetrain Configurations on 2006 Jeep Wrangler?
A: The VSS position is the speedometer pinion gear adapter for all vehicles, with it being on the transfer case extension on the left for 4WD and on the transmission extension housing on the left for 2WD. The first step is to elevate the vehicle and next, push the slide tab to disconnect the electrical connector. Then, after placing the sensor where you want it, push on the secondary release lock to ease the connector out of the sensor. Then, unscrew the sensor mounting bolt and simply pull the sensor straight out from the pinion gear adapter, leaving the adapter on the transmission. Before placing the sensor into the adapter, clean the interior of the adapter, mount the sensor using the bolt and check that the sensor is tightly placed and even with the adapter. At last, tighten the sensor mounting bolt to 2.2 Nm (20 inch lbs.) and snap back the electrical connector.