Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
Item Weight: 0.50 Pounds
Item Dimensions: 1.5 x 2.8 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4799061AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2007 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
2007 Jeep Wrangler Speed Sensor Parts and Q&A
Q: How to Service and Repair a Wheel Speed Sensor on 2007 Jeep Wrangler?
A: Make sure to lift and hold the vehicle steady before working on the wheel speed sensor. After that, detach the disc brake caliper and adapter, then the disc brake rotor. Prior to removing the sensor, gently clean it and the area around it with a shop towel. Following that, undo the bolt attaching the sensor to the hub/bearing and get the sensor out through the hole on the brake shield. From the brake hose, pull away the sensor wire and release the sensor wire's socket from the harness plug.