How to Service and Repair the ABS Control Module on 2006 Jeep Wrangler?

Before performing service on the Electronic Brake Control Module, disconnect the negative battery cable from the battery. After inserting the pump into the CAB, pull and release the CAB harness connector and take the pump connector out. Tak out the mounting bolts on the CAB and then remove the CAB from the HDU. First, place the CAB onto the HCU and attach it using the mounting bolts tightened to 2 N.m (16 in. lbs.). Then, plug the pump's electrical end into the CAB, followed by the wiring harness connector, pushing the release button to lock them in place. In the end, put the negative cable back into place on the battery.

OEM 2006 Jeep Wrangler ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2006 Jeep Wrangler Control Assembly Part Number: 52128487AA
Product Specifications
- Other Name: Actuator - Anti-Lock Brake; ABS Control Module; Hydraulic Unit; Control Unit Anti-Lock Brake
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128487AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Control Module Part Number: 5073793AA
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073793AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module on 2006 Jeep Wrangler?
A: Before performing service on the Electronic Brake Control Module, disconnect the negative battery cable from the battery. After inserting the pump into the CAB, pull and release the CAB harness connector and take the pump connector out. Tak out the mounting bolts on the CAB and then remove the CAB from the HDU. First, place the CAB onto the HCU and attach it using the mounting bolts tightened to 2 N.m (16 in. lbs.). Then, plug the pump's electrical end into the CAB, followed by the wiring harness connector, pushing the release button to lock them in place. In the end, put the negative cable back into place on the battery.