Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Chrysler Aspen Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2007 Chrysler Aspen Air Bag Sensor - 4896061AB
    2007 Chrysler Aspen Air Bag Sensor - 4896061AB
    2007 Chrysler Aspen Air Bag Sensor - 4896061AB
    2007 Chrysler Aspen Air Bag Sensor Diagram - 4896061AB
    View related parts

    2007 Chrysler Aspen Air Bag Sensor, Front Part Number: 4896061AB

    $75.57 MSRP: $112.00
    You Save: $36.43 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
    • Position: Front
    • Replaces: 4672311AA, 52851601AB, 4896061AA
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 1.2 x 1.4 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896061AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Aspen Submodels:
    • Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
  • 2007 Chrysler Aspen Air Bag Sensor - 4896065AB
    2007 Chrysler Aspen Air Bag Sensor Diagram - 4896065AB
    View related parts

    2007 Chrysler Aspen Impact Sensor, Outer Part Number: 4896065AB

    $194.09 MSRP: $274.00
    You Save: $79.91 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
    • Position: Outer
    • Replaces: 4896065AA
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.5 x 1.2 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896065AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Aspen Submodels:
    • Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2007 Chrysler Aspen Air Bag Sensor Parts and Q&A

  • Q: How to Safely and Correctly Service an Air Bag Sensor on 2007 Chrysler Aspen?
    A: Before reaching the front impact sensor, first disconnect and isolate the negative battery cable and let the system capacitor discharge for at least two minutes. Making contact with the front impact sensor or letting it fall may result in harm or a calibration error; a broken front impact sensor must be replaced. Put the right or left front impact sensor into the engine compartment and plug the dash and headlight wire harness into the sensor connector. Make sure the sensor sits flat onto the radiator support vertical member on the right or left side, so its anti-rotation pin enters into the lower clearance hole of the radiator support. Slide the sensor into place by putting the screw through the sensor and turning it until it reaches 6 Nm (55 in. lbs.). Do not reconnect the negative battery cable until the car's air bag check is completed after working on any part of the air bag system.

Related 2007 Chrysler Aspen Parts

Alternate Year Models

+
2008 Chrysler Aspen Air Bag Sensor