How to Service and Repair an Air Bag Sensor in the C-Pillar on 2008 Chrysler Aspen?

The side impact sensor in the C-pillar should be serviced by disconnecting the negative cable of the battery, waiting a few minutes to drain the system's capacitor and then reconnecting the cable. Secure the rivet nut that holds the side impact sensor (3) in place inside the inner C-pillar (5), making certain it's in good shape. Connect the side impact sensor at the inner C-pillar and join the body wire harness connector (1) to the sensor's receptacle. Set the sensor along the inner C-pillar so that the anti-rotation pin on its back slips through the clearance hole (4). Attach the sensor by tightening the screw (2) to a torque of 6 Nm (50 in. lbs.). Reattach the lower C-pillar with the quarter trim panel. Do not link the ignition back to the battery until you complete the SRS verification test after any repair on an SRS element.

OEM 2008 Chrysler Aspen Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2008 Chrysler Aspen Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896065AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Air Bag Sensor Parts and Q&A

Q: How to Service and Repair an Air Bag Sensor in the C-Pillar on 2008 Chrysler Aspen?
A: The side impact sensor in the C-pillar should be serviced by disconnecting the negative cable of the battery, waiting a few minutes to drain the system's capacitor and then reconnecting the cable. Secure the rivet nut that holds the side impact sensor (3) in place inside the inner C-pillar (5), making certain it's in good shape. Connect the side impact sensor at the inner C-pillar and join the body wire harness connector (1) to the sensor's receptacle. Set the sensor along the inner C-pillar so that the anti-rotation pin on its back slips through the clearance hole (4). Attach the sensor by tightening the screw (2) to a torque of 6 Nm (50 in. lbs.). Reattach the lower C-pillar with the quarter trim panel. Do not link the ignition back to the battery until you complete the SRS verification test after any repair on an SRS element.