How to Safely Service and Install an Air Bag Sensor on Chrysler Aspen?

Before servicing the front impact sensor, turn off the SRS by first removing the negative battery cable, setting it aside and letting the system's capacitor drain for two minutes. Take care of the sensor on the front when handling it, since dropping it can cause damage or a need to recalibrate the system; if the sensor is dropped, you need to replace it with a new one. Put the right or left front impact sensor in the engine compartment and make sure the headlamp and dash wire harness is connected to the sensor receptacle. Fix the sensor to the vertical member at the rear of the left or right radiator support so that the anti-rotation pin fits into the lower hole. Use a torque wrench to tighten the screw on the sensor to the back of the support vertical member to 6 Nm (55 in. lbs.). Do not put the negative battery cable back until after finishing the SRS verification test following any service to the SRS unit.

OEM Chrysler Aspen Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
Chrysler Aspen Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Air Bag Sensor

Choose OEM Air Bag Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Air Bag Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Air Bag Sensor is the primary safety feature in the Chrysler Aspen automobiles which are well-known for their competence both in respect to durability and effectiveness. This enhanced Air Bag Sensor or crash sensor is a very important element of the car because it assists in sensing impact during a crash, thus dispenses air bags timely to shield occupants. As it is always used in different Chrysler Aspen models, it's an essential cog of efficiency and safety to be deemed an inalienable part of the car's assembly. The Chrysler Aspen manufactured between 2006 and 2008 is a full-size luxury SUV that features an ample storage space and increased power output, and occupant protection enhancement adding the Air Bag Sensor to the mix. It is for this high capability to immediately detect collisions that Air Bag Sensorstruly shines in the market for automotive products, reassuring the drivers as well as their passengers. Further, the sensor's adaptability to the various trims of the Chrysler Aspen such as the Chrysler Aspen limited trims as well as the Chrysler aspen hybrid trims also proved useful. Additional features like the connectiveness with he car's control unit also add to the efficiency because it makes sure that the air bags deploys at the right time during the accident. In sum, the Air Bag Sensor is the perfect reflection of the brand's conviction to safety and technology that supports the Chrysler Aspen being a safe, high-end SUV.

Chrysler Aspen Air Bag Sensor Parts and Q&A

Air Bag Sensor, Front
4896061AB
Q: How to Safely Service and Install an Air Bag Sensor on Chrysler Aspen?
A:
Before servicing the front impact sensor, turn off the SRS by first removing the negative battery cable, setting it aside and letting the system's capacitor drain for two minutes. Take care of the sensor on the front when handling it, since dropping it can cause damage or a need to recalibrate the system; if the sensor is dropped, you need to replace it with a new one. Put the right or left front impact sensor in the engine compartment and make sure the headlamp and dash wire harness is connected to the sensor receptacle. Fix the sensor to the vertical member at the rear of the left or right radiator support so that the anti-rotation pin fits into the lower hole. Use a torque wrench to tighten the screw on the sensor to the back of the support vertical member to 6 Nm (55 in. lbs.). Do not put the negative battery cable back until after finishing the SRS verification test following any service to the SRS unit.