JeepParts
My Garage
My Account
Cart
OEM 2007 Chrysler Aspen Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Evaporators found
2007 Chrysler Aspen Evaporator Core, Front Part Number: 68019145AA
$321.45 MSRP: $769.00You Save: $447.55 (59%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Evaporato - A/C; A/C Evaporator Core, Front; A/C Evaporator Core Repair Kit; Evaporator A/C; Includes Expansion Valve, Clamp, O-Rings; A/C Evaporator Core.
- Position: Front
- Item Weight: 5.40 Pounds
- Item Dimensions: 23.8 x 10.8 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68019145AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Chrysler Aspen Evaporator Core, Rear Part Number: 68020263AA
Product Specifications- Other Name: Evaporato - A/C; A/C Evaporator Core, Rear; A/C Evaporator Core Repair Kit; Evaporator A/C Includes: O - Rings; A/C Evaporator
- Position: Rear
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.1 x 9.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020263AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Chrysler Aspen Evaporator Parts and Q&A
- Q: How to Remove and Service an Evaporator Core on 2007 Chrysler Aspen?A: Start by undoing the HVAC housing from the back of the car and putting it on a workbench to work on the evaporator core. Get rid of the rear HVAC wire harness from the rear blower motor and the rear blower motor resistor. After that, remove the screws holding the rear air inlet housing to the rear HVAC housing and then remove the inlet housing yourself. Unwrap the rear A/C evaporator tubes' insulator to get to the rear A/C expansion valve bolts. Remove the two bolts binding the rear A/C evaporator tubes to the rear A/C expansion valve and the rear evaporator extension tube tapping block. Very gently remove the rear A/C evaporator from the top of the rear HVAC housing. Take out the rear A/C expansion valve from the rear evaporator extension tube tapping block and toss the O-ring seals. At the end, put plugs into or cover with tape the exposed rear evaporator and extension tube fittings and all rear expansion valve ports.
Related 2007 Chrysler Aspen Parts
2007 Chrysler Aspen Blend Door Actuator
2007 Chrysler Aspen A/C Accumulator
2007 Chrysler Aspen A/C Clutch
2007 Chrysler Aspen A/C Compressor
2007 Chrysler Aspen A/C Condenser
2007 Chrysler Aspen A/C Expansion Valve
2007 Chrysler Aspen A/C Hose
2007 Chrysler Aspen A/C Switch
2007 Chrysler Aspen Blower Motor
2007 Chrysler Aspen Blower Motor Resistor
2007 Chrysler Aspen HVAC Pressure Switch
2007 Chrysler Aspen Heater Core