How to Properly Bleed a Brake Master Cylinder Before Installation on 2007 Chrysler Crossfire?

Anchor the new brake master cylinder in a vise with brass jaws and secure tubes to the outlet ports. Place the tube ends right into the reservoir's bottom. Pour in new brake fluid, then press the cylinder's pistons in with a wooden dowel. Open the pistons so they close with the spring pressure and continue to repeat the action until everything inside is bubble-free. A fitter will need bleed tubes made out of brake line, as well as a wood dowel for pushing the pistons.

OEM 2007 Chrysler Crossfire Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2007 Chrysler Crossfire Master Cylinder Part Number: 5127447AA
Product Specifications
- Other Name: Valve - Brake; Brake Master Cylinder
- Item Weight: 2.30 Pounds
- Item Dimensions: 10.6 x 3.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5127447AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Brake Master Cylinder Parts and Q&A

Q: How to Properly Bleed a Brake Master Cylinder Before Installation on 2007 Chrysler Crossfire?
A: Anchor the new brake master cylinder in a vise with brass jaws and secure tubes to the outlet ports. Place the tube ends right into the reservoir's bottom. Pour in new brake fluid, then press the cylinder's pistons in with a wooden dowel. Open the pistons so they close with the spring pressure and continue to repeat the action until everything inside is bubble-free. A fitter will need bleed tubes made out of brake line, as well as a wood dowel for pushing the pistons.