How is the Fuel Filler Neck Installed on 2007 Chrysler Pacifica?

Install the filler tube first and use 3 screws to secure it to the quarter panel to set up the fuel filler neck. After that, link the vent line to the filler tube and place the fuel filler tube taken from the rubber hose at the fuel tank. Clip the ground wire onto the body after that, then attach the left rear splash shield and left rear tire. After steadying the car on the stands, insert the negative battery cable to its clamp.

OEM 2007 Chrysler Pacifica Fuel Filler Neck

Fuel Tank Filler Neck Hose Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Filler Neck found

View related parts
2007 Chrysler Pacifica Filler Neck Part Number: 4809407AF
Product Specifications
- Other Name: Tube - Fuel Filler; Fuel Filler Hose; Fuel Tank Filler Neck; Fuel Filler Neck; Filler Tube; Filler Hose; Tube Fuel Filler
- Replaces: 4809407AD, 4809407AE, 4809407AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 45.7 x 11.1 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4809407AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Fuel Filler Neck Parts and Q&A

Q: How is the Fuel Filler Neck Installed on 2007 Chrysler Pacifica?
A: Install the filler tube first and use 3 screws to secure it to the quarter panel to set up the fuel filler neck. After that, link the vent line to the filler tube and place the fuel filler tube taken from the rubber hose at the fuel tank. Clip the ground wire onto the body after that, then attach the left rear splash shield and left rear tire. After steadying the car on the stands, insert the negative battery cable to its clamp.