How to Install a Parking Assist Distance Sensor on 2007 Chrysler Pacifica?

Start by placing the bezel over the opening in the fascia and snapping it down firmly, making sure it was replaced if previously broken. Then, locate the Park Assist Sensor 3 in the retaining bezel 2 and confirm it clicks and secures. After that, pair electrical connector 2 and connect it to the vehicle, put on the rear fascia and finish by connecting the battery negative cable.

OEM 2007 Chrysler Pacifica Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Assist Distance Sensor found

View related parts
2007 Chrysler Pacifica Parking Sensor, Silver Part Number: YK91WS2AA
$95.46 MSRP: $121.01
You Save: $25.55 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor; Parking Sensors; Sensor; Sensor Parking Assist
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.7 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YK91WS2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Parking Assist Distance Sensor Parts and Q&A

Q: How to Install a Parking Assist Distance Sensor on 2007 Chrysler Pacifica?
A: Start by placing the bezel over the opening in the fascia and snapping it down firmly, making sure it was replaced if previously broken. Then, locate the Park Assist Sensor 3 in the retaining bezel 2 and confirm it clicks and secures. After that, pair electrical connector 2 and connect it to the vehicle, put on the rear fascia and finish by connecting the battery negative cable.