OEM 2007 Chrysler Pacifica Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2007 Chrysler Pacifica Air Bag Sensor Diagram - 4671779AC
    View related parts

    2007 Chrysler Pacifica Impact Sensor, Front Part Number: 4671779AC

    $48.02 MSRP: $103.00
    You Save: $54.98 (54%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
    • Position: Front
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.8 x 2.6 x 3.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4671779AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
  • 2007 Chrysler Pacifica Air Bag Sensor Diagram - 4896059AA
    View related parts
    Product Specifications
    • Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
    • Position: Front
    • Replaces: 4896023AA, 4686957AC
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 3.8 x 2.5 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896059AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Air Bag Sensor Parts and Q&A

  • Q: How to Service and Repair an Air Bag Sensor on 2007 Chrysler Pacifica?
    A: For impact sensor service or repair, open the hood and disconnect the negative battery cable after waiting at least two minutes so the system reserve capacitor empties and prevents accidental air bag deployment. Replace the front impact sensor by taking the front lamp unit off the side of the car it's located on, uncovering the headlamp opening to remove its two mounting screws and then unplugging the electrical connector and removing the sensor. First, take away the lower trim under the B-pillar, take out the two retaining screws for the impact sensor, remove the electrical connector and free the impact sensor. For the C-pillar sensors, lift the hood, disconnect the negative battery terminal, separate the quarter trim panel at the side being repaired, take out the two screws on the sensor, unplug the electrical connection and pull the sensor out of the car.

Related 2007 Chrysler Pacifica Parts