How to Install a Power Steering Reservoir on 2007 Chrysler Pacifica?

To connect reservoir 2 on the engine mounting flange, attach it with mounting screw 1 and tighten it to 28 Nm (21 ft. lbs.). Place the open end of hose 3 into reservoir 2 and put the hose clamp past the bead on the fitting on the reservoir. Just like that, link return hose 4 to reservoir 2 and be sure to add the hose clamp beyond the bead on the fitting. After that, place the engine cover back on and link the negative cable once again to the negative battery post. Don't forget to bleed and fill the power steering before looking for any leaks after the installation.

OEM 2007 Chrysler Pacifica Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2007 Chrysler Pacifica Reservoir Part Number: 4809965AA
Product Specifications
- Other Name: Reservoir - Power Steering Fluid; Power Steering Reservoir; Reservoir Power Steering Fluid; Reservoir Power Steering Pump
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.4 x 5.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4809965AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Power Steering Reservoir Parts and Q&A

Q: How to Install a Power Steering Reservoir on 2007 Chrysler Pacifica?
A: To connect reservoir 2 on the engine mounting flange, attach it with mounting screw 1 and tighten it to 28 Nm (21 ft. lbs.). Place the open end of hose 3 into reservoir 2 and put the hose clamp past the bead on the fitting on the reservoir. Just like that, link return hose 4 to reservoir 2 and be sure to add the hose clamp beyond the bead on the fitting. After that, place the engine cover back on and link the negative cable once again to the negative battery post. Don't forget to bleed and fill the power steering before looking for any leaks after the installation.