How to Maintain a Coolant Temperature Sensor for Optimal Performance on 2007 Chrysler PT Cruiser?

Before you service the Coolant Temperature Sensor/Switch in your computer, remove the negative battery cable. With the non-turbo engine, partially un-fill the coolant below the temperature sensor 1, connect wires and then pull out the sensor. Also, on turbo engine models, remove the negative attachment from the battery, slightly drain the cooling system, detach the upper screw from the torque strut, disconnect the electrical plug and remove the sensor.

OEM 2007 Chrysler PT Cruiser Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2007 Chrysler PT Cruiser Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 1.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2007 Chrysler PT Cruiser Coolant Temperature Sensor Parts and Q&A

Q: How to Maintain a Coolant Temperature Sensor for Optimal Performance on 2007 Chrysler PT Cruiser?
A: Before you service the Coolant Temperature Sensor/Switch in your computer, remove the negative battery cable. With the non-turbo engine, partially un-fill the coolant below the temperature sensor 1, connect wires and then pull out the sensor. Also, on turbo engine models, remove the negative attachment from the battery, slightly drain the cooling system, detach the upper screw from the torque strut, disconnect the electrical plug and remove the sensor.