How to Install a Trunk Lock Cylinder with a New Gasket on 2007 Chrysler PT Cruiser?

Place the trunk/liftgate lock cylinder (3) onto the decklid (5) and attach a new gasket (4) to the cylinder. Engage the retainer clip (2) under the lock cylinder through the decklid recess. Attach the link (1) of the lock cylinder to the lock cylinder and slide on the retainer clip, making certain both are fully engaged. After that, place the trim panel for the decklid and hook up the negative battery cable again. Check that the cylinder and latch are working, as marked by 6.

OEM 2007 Chrysler PT Cruiser Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lock Cylinder found

View related parts
2007 Chrysler PT Cruiser Lock & Cylinder, Rear Part Number: 5114569AA
Product Specifications
- Other Name: Cylinder Lock - Tailgate Lock; Deck Lid Lock, Rear; Liftgate Lock, Rear; Trunk Lock Cylinder; Door Lock Cylinder; Lock Cylinder; Cylinder Tailgate Lock
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.7 x 4.1 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5114569AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2007 Chrysler PT Cruiser Trunk Lock Cylinder Parts and Q&A

Q: How to Install a Trunk Lock Cylinder with a New Gasket on 2007 Chrysler PT Cruiser?
A: Place the trunk/liftgate lock cylinder (3) onto the decklid (5) and attach a new gasket (4) to the cylinder. Engage the retainer clip (2) under the lock cylinder through the decklid recess. Attach the link (1) of the lock cylinder to the lock cylinder and slide on the retainer clip, making certain both are fully engaged. After that, place the trim panel for the decklid and hook up the negative battery cable again. Check that the cylinder and latch are working, as marked by 6.