How to Service and Repair a Power Steering Cooler on 2007 Chrysler Sebring?

Begin the power steering fluid cooler service by removing and disposing of as much fluid from the reservoir as you can. After that, raise the vehicle and take steps to support it. Should there be one, remove the belly pan below the engine and after that the lower fascia valance. Loosen the clamps holding the fluid return pipes to the power steering cooler line and take out the hoses from the line. Toss away the bumper reinforcement screws and disconnect the air cooler line afterward.

OEM 2007 Chrysler Sebring Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Cooler found

View related parts
2007 Chrysler Sebring Oil Cooler Part Number: 4743898AJ
$199.89 MSRP: $301.00
You Save: $101.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Cooler
- Replaces: 4743898AH, 4743898AF, 4743898AE, 4743898AG, 4743898AI, 4743898AD
- Item Weight: 2.40 Pounds
- Item Dimensions: 40.6 x 27.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4743898AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Power Steering Cooler Parts and Q&A

Q: How to Service and Repair a Power Steering Cooler on 2007 Chrysler Sebring?
A: Begin the power steering fluid cooler service by removing and disposing of as much fluid from the reservoir as you can. After that, raise the vehicle and take steps to support it. Should there be one, remove the belly pan below the engine and after that the lower fascia valance. Loosen the clamps holding the fluid return pipes to the power steering cooler line and take out the hoses from the line. Toss away the bumper reinforcement screws and disconnect the air cooler line afterward.