How to service a Power Steering Cooler on 2008 Chrysler Sebring?

The first thing to do in servicing the Power Steering Fluid Cooler is to take out as much of the power steering fluid as you can from the reservoir. After that, lift and underpin the vehicle. Applicable cars require you to first unbolt the belly pan below the engine and afterward take off the lower fascia valence. Using a wrench, untighten the clamps holding the return hoses onto the fluid cooler line and separate them from the cooler. Eliminate the two cooler mounting push pins at the bumper reinforcement and then remove the cooler line from the car.

OEM 2008 Chrysler Sebring Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Cooler found

View related parts
2008 Chrysler Sebring Oil Cooler Part Number: 4743898AJ
$199.89 MSRP: $301.00
You Save: $101.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Cooler
- Replaces: 4743898AH, 4743898AF, 4743898AE, 4743898AG, 4743898AI, 4743898AD
- Item Weight: 2.40 Pounds
- Item Dimensions: 40.6 x 27.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4743898AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Power Steering Cooler Parts and Q&A

Q: How to service a Power Steering Cooler on 2008 Chrysler Sebring?
A: The first thing to do in servicing the Power Steering Fluid Cooler is to take out as much of the power steering fluid as you can from the reservoir. After that, lift and underpin the vehicle. Applicable cars require you to first unbolt the belly pan below the engine and afterward take off the lower fascia valence. Using a wrench, untighten the clamps holding the return hoses onto the fluid cooler line and separate them from the cooler. Eliminate the two cooler mounting push pins at the bumper reinforcement and then remove the cooler line from the car.