Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
2007 Dodge Caliber A/C Switch Parts and Q&A
Q: What Precautions Should Be Taken Before Servicing the A/C Switch and Related Components on 2007 Dodge Caliber?
A: Always turn off the air bag system by detaching the negative battery cable and waiting two minutes, to ensure no accidental air bag deployment when you work on the steering wheel, column or any component on the instrument panel. Initially, remove and separate the negative battery cable. Then, take off the center bezel from the instrument panel and break the connections to the clock, power window switches and accessory switches. Notice where the control cables in their positions before disconnecting them for a more accurate assembly. Raise the control panel, disengage the clips that hold the control cables in place behind the unit and remove the unit. Following this, remove the clips that fix the control cables to the mode and temperature gear. Take out the wire harness connectors from the back of the A/C-heater control and lay down the center bezel on a workbench. In the end, unscrew the four screws connecting the A/C-heater control to the back of the center bezel and pull out the control.