How to Install the A/C Switch for Temperature Control on 2008 Dodge Caliber?

Insert the A/C-heater control into the center of the instrument panel bezel and close it with the four screws, fastening them tightly by turning each to 2 Nm (17 in. lbs.). Then, insert the center bezel onto the instrument panel and connect harness parts (3 and 4) to the back of the A/C-heater control, placing the mode cable first, then the temperature cable. Join the control cables (1 and 9) to the mode door control sector gear (2) and temperature control sector gear (5), making sure the clips click well. After that, fit the control cables at the rear of the A/C-heater control, remembering to make sure the clips snap in place. After that, attach the wire harness connectors to the accessory switches, power window switches and clock, put on the center bezel and replace the negative battery cable.

OEM 2008 Dodge Caliber A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Switches found

View related parts
2008 Dodge Caliber Heater Control, Black/Silver Knob Part Number: 55111878AE
Product Specifications
- Other Name: Control - Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 55111878AC, 5058300AE, 55111878AB, 5058300AC, 5058300AD, 55111878AD, 55111878AA
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.7 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111878AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Caliber Heater Control Part Number: 55111874AF
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 55111847AC, 5058299AE, 5058299AC, 55111874AD, 5058307AC, 5058307AE, 55111874AE, 55111874AB, 55111874AA, 55111874AC, 5058307AD, 55111847AD, 5058299AD, 55111847AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.0 x 4.9 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111874AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber A/C Switch Parts and Q&A

Q: How to Install the A/C Switch for Temperature Control on 2008 Dodge Caliber?
A: Insert the A/C-heater control into the center of the instrument panel bezel and close it with the four screws, fastening them tightly by turning each to 2 Nm (17 in. lbs.). Then, insert the center bezel onto the instrument panel and connect harness parts (3 and 4) to the back of the A/C-heater control, placing the mode cable first, then the temperature cable. Join the control cables (1 and 9) to the mode door control sector gear (2) and temperature control sector gear (5), making sure the clips click well. After that, fit the control cables at the rear of the A/C-heater control, remembering to make sure the clips snap in place. After that, attach the wire harness connectors to the accessory switches, power window switches and clock, put on the center bezel and replace the negative battery cable.