Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator A/C And Heater Serviced With Distribution Housing; Actuator A/C And Heater
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 2.0 x 3.1 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5061099AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Caravan Submodels:
Base, C/V, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
2007 Dodge Caravan Blend Door Actuator Parts and Q&A
Q: How to Install and Service a Blend Door Actuator on 2007 Dodge Caravan?
A: Place the actuator onto the air distribution housing and turn it as necessary to match the splines on the actuator with those on the door linkage. Place screws 1 and 2 through the blend door actuator and air distribution housing and tighten them to 2 Nm (17 in.lbs.). Screw the HVAC wire harness connector onto the blend door actuator. Put the silencer beneath the part of the instrument panel closest to the driver. Reconnect the flat end of the negative battery cable and recalibrate the A/C-heater control.