How to Service and Repair Battery Cables on 2007 Dodge Dakota?

The first step in handling the battery cables is to turn the ignition to Off and deactivate all electrical accessories. To work on the negative cable, undo and remove the bolt attaching the negative eyelet (3) to the left front fender; remove the eyelet last. Follow the battery cable route, undo the pushpins, fasteners and other clips, until you can pull it from the vehicle. Raise the vehicle on a hoist, take out the bolt that attaches the negative cable to the engine, separate the negative cable from its connection to the engine harness conduit and then remove the cable from the vehicle. As for the positive cable, also set the ignition to Off with all electrical accessories turned off and then unplug and isolate the battery's negative terminal. Pull out the bolts (3) from the air intake resonator (4) and then release the clamp (2) of the air inlet tube (1) so you can remove the resonator. Detach the battery positive terminal from its clamp (8) and remove the nut (5) holding the cable to the Integrated Power Module (IPM) (7) stud (6). Remove the terminal cap, release the cable nut and disconnect the starter solenoid wire harness from the connector. Then, take out the connecting pushpin from the battery cable on the left frame rail. Raise the vehicle using a hoist, remove the nut (2) attaching the cable (1) to the starter solenoid (3) and then free the battery cable pushpin (6). Lift the vehicle and then take out the car's positive battery cable.

OEM 2007 Dodge Dakota Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Battery Cables found

View related parts
2007 Dodge Dakota Positive Cable Part Number: 4801276AB
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801276AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 4801275AB
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801275AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 4801274AB
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801274AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 56049641AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Replaces: 56049641AD
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049641AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 56049639AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Wiring Battery Positive
- Replaces: 56049639AD
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049639AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 4801273AC
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Replaces: 4801273AB
- Item Weight: 1.60 Pounds
- Item Dimensions: 13.7 x 7.7 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801273AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 56049640AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Wiring Battery Positive
- Replaces: 56049640AD
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049640AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS
View related parts
2007 Dodge Dakota Positive Cable Part Number: 56049649AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Replaces: 56049649AD
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049649AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Dodge Dakota Battery Cable Parts and Q&A

Q: How to Service and Repair Battery Cables on 2007 Dodge Dakota?
A: The first step in handling the battery cables is to turn the ignition to Off and deactivate all electrical accessories. To work on the negative cable, undo and remove the bolt attaching the negative eyelet (3) to the left front fender; remove the eyelet last. Follow the battery cable route, undo the pushpins, fasteners and other clips, until you can pull it from the vehicle. Raise the vehicle on a hoist, take out the bolt that attaches the negative cable to the engine, separate the negative cable from its connection to the engine harness conduit and then remove the cable from the vehicle. As for the positive cable, also set the ignition to Off with all electrical accessories turned off and then unplug and isolate the battery's negative terminal. Pull out the bolts (3) from the air intake resonator (4) and then release the clamp (2) of the air inlet tube (1) so you can remove the resonator. Detach the battery positive terminal from its clamp (8) and remove the nut (5) holding the cable to the Integrated Power Module (IPM) (7) stud (6). Remove the terminal cap, release the cable nut and disconnect the starter solenoid wire harness from the connector. Then, take out the connecting pushpin from the battery cable on the left frame rail. Raise the vehicle using a hoist, remove the nut (2) attaching the cable (1) to the starter solenoid (3) and then free the battery cable pushpin (6). Lift the vehicle and then take out the car's positive battery cable.