How to Remove and Replace the Drive Belt on 3.7L/4.7L/5.7L Engines on 2007 Dodge Dakota?

Before removing and changing the drive belt on 3.7L/4.7L/5.7L engines, unhook the negative battery cable from the battery. After that, use a screwdriver to turn the belt tensioner counterclockwise 6 times until it contacts the point marked and then remove the belt 2. Then, rotate the tensioner slowly back to the freearm position to prevent the tensioner arm from snapping and hurting the tensioner. Make sure, the belt tension is controlled by an automatic spring-loaded belt tensioner, so it cannot be adjusted.

OEM 2007 Dodge Dakota Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2007 Dodge Dakota Serpentine Belt Part Number: 53032037AM
$39.38 MSRP: $58.35
You Save: $18.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032037AL
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.1 x 6.2 x 20.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032037AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Dodge Dakota Drive Belt Parts and Q&A

Q: How to Remove and Replace the Drive Belt on 3.7L/4.7L/5.7L Engines on 2007 Dodge Dakota?
A: Before removing and changing the drive belt on 3.7L/4.7L/5.7L engines, unhook the negative battery cable from the battery. After that, use a screwdriver to turn the belt tensioner counterclockwise 6 times until it contacts the point marked and then remove the belt 2. Then, rotate the tensioner slowly back to the freearm position to prevent the tensioner arm from snapping and hurting the tensioner. Make sure, the belt tension is controlled by an automatic spring-loaded belt tensioner, so it cannot be adjusted.