JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Dakota Steering Knuckle
Front Steering Knuckle- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Steering Knuckles found
Product Specifications- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 52855116AB, 52855116AA
- Item Weight: 18.10 Pounds
- Item Dimensions: 16.6 x 12.2 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855116AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Dakota Knuckle, Front Driver Side Part Number: 52855117AC
Product Specifications- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 52855117AA, 52855117AB
- Item Weight: 18.80 Pounds
- Item Dimensions: 17.3 x 12.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855117AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Dakota Steering Knuckle Parts and Q&A
- Q: How to Service and Repair a Steering Knuckle on 2007 Dodge Dakota?A: Start by raising and supporting your car and next remove the wheel and tire assembly. Remove the brake caliper, rotor, shield and ABS wheel speed sensor from the wheel next. For 4X4 vehicles, take out the front halfshaft nut. After removing the tie rod end nut, slide the puller C-3894-A over the tie rod to release it from the knuckle and do not damage the ball joint seal when pulling the ball joint with puller 8677. Loose the upper ball joint nut and then use puller 8677 to disconnect the ball joint from the knuckle. Lift up the lower control arm with a jack, then use a socket and ratchet to remove the lower ball joint nut, followed by puller 8677 to free the ball joint from the knuckle and let you remove it too. After that, unbolt the hub or bearing from the knuckle and pull it out before taking out the steering knuckle at the end.
Related 2007 Dodge Dakota Parts
2007 Dodge Dakota Wheel Bearing
2007 Dodge Dakota Coil Springs
2007 Dodge Dakota Control Arm
2007 Dodge Dakota Lug Nuts
2007 Dodge Dakota Shock Absorber
2007 Dodge Dakota Alignment Bolt
2007 Dodge Dakota Axle Shaft Seal
2007 Dodge Dakota Coil Spring Insulator
2007 Dodge Dakota Control Arm Bolt
2007 Dodge Dakota Control Arm Bushing
2007 Dodge Dakota Shock And Strut Mount
2007 Dodge Dakota Sway Bar Kit