Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Dakota Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

  • 2008 Dodge Dakota Steering Knuckle - 52855116AC
    2008 Dodge Dakota Steering Knuckle - 52855116AC
    2008 Dodge Dakota Steering Knuckle - 52855116AC
    2008 Dodge Dakota Steering Knuckle Diagram - 52855116AC
    View related parts

    2008 Dodge Dakota Knuckle, Front Passenger Side Part Number: 52855116AC

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
    • Position: Front Passenger Side
    • Replaces: 52855116AB, 52855116AA
    • Item Weight: 18.10 Pounds
    • Item Dimensions: 16.6 x 12.2 x 5.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52855116AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2008 Dodge Dakota Steering Knuckle - 52855117AC
    2008 Dodge Dakota Steering Knuckle Diagram - 52855117AC
    View related parts

    2008 Dodge Dakota Knuckle, Front Driver Side Part Number: 52855117AC

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
    • Position: Front Driver Side
    • Replaces: 52855117AA, 52855117AB
    • Item Weight: 18.80 Pounds
    • Item Dimensions: 17.3 x 12.4 x 5.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52855117AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Dakota Steering Knuckle Parts and Q&A

  • Q: How to Remove the Front Steering Knuckle on 2008 Dodge Dakota?
    A: First, position the vehicle so it is off the ground, then take the wheel and tire assembly off. After that, disconnect the brake caliper, rotor, shield and ABS wheel speed sensor if fitted. To work on a 4X4 subframe, first take out the front halfshaft nut. After that, remove the tie rod end nut and use puller C-3894-A to split the tie rod from the knuckle. Be sure not to damage the ball joint seal when using puller 8677. Withdraw the upper ball joint nut and use puller 8677 to split up the ball joint from its position on the knuckle. Lift the lower control arm with a jack, then remove the nut from the lower ball joint with a puller. Withpuller 8677, separate the ball joint from the knuckle and remove the knuckle. Once that's done, pop off the bolts holding the hub/bearing in place and remove the hub/bearing from the steering knuckle.

Related 2008 Dodge Dakota Parts

Alternate Year Models

+
2007 Dodge Dakota Steering Knuckle 2009 Dodge Dakota Steering Knuckle