How to Install a Tie Rod End on 2007 Dodge Nitro?

Turn the outer tie rod end (1) the same number of times as when it was removed to install it on the inner tie rod end. Then, put the outer tie rod end (1) on the knuckle and tighten the nut (2) to 41 Nm (30 ft.lbs.) and add another 90° of tightening. After that, use the torque wrench to tighten the jam nut to 75 Nm (55 ft.lbs). Next, set the tires and wheels and at the end, adjust the toe and position the steering wheel in the center.

OEM 2007 Dodge Nitro Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

View related parts
2007 Dodge Nitro Outer Tie Rod, Passenger Side Part Number: 52125366AA
$74.43 MSRP: $114.00
You Save: $39.57 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 1.8 x 4.2 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125366AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Outer Tie Rod, Driver Side Part Number: 52125367AA
$51.94 MSRP: $114.00
You Save: $62.06 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 1.9 x 4.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125367AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Tie Rod End Parts and Q&A

Q: How to Install a Tie Rod End on 2007 Dodge Nitro?
A: Turn the outer tie rod end (1) the same number of times as when it was removed to install it on the inner tie rod end. Then, put the outer tie rod end (1) on the knuckle and tighten the nut (2) to 41 Nm (30 ft.lbs.) and add another 90° of tightening. After that, use the torque wrench to tighten the jam nut to 75 Nm (55 ft.lbs). Next, set the tires and wheels and at the end, adjust the toe and position the steering wheel in the center.