How to Service and Repair a Tie Rod End on 2008 Dodge Nitro?

First, place the vehicle on supports, replace the tire and wheel assembly and mark the outer tie rod end near the inner one to make reinstallation simple. Relax the jam nut and free up the outer tie rod end nut (2). You should always disassemble the ball joints and tie rods using the correct tool so that the seal or knuckle will not be damaged. Using tool 9360 (2), carefully separate the end of the outer tie rod (1) from the knuckle (3) and keep note of the number of turns you make. Take the outer tie rod end (1) off of the inner one before moving on.

OEM 2008 Dodge Nitro Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

View related parts
2008 Dodge Nitro Outer Tie Rod, Passenger Side Part Number: 52125366AA
$74.43 MSRP: $114.00
You Save: $39.57 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 1.8 x 4.2 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125366AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Outer Tie Rod, Driver Side Part Number: 52125367AA
$51.94 MSRP: $114.00
You Save: $62.06 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 1.9 x 4.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125367AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Tie Rod End Parts and Q&A

Q: How to Service and Repair a Tie Rod End on 2008 Dodge Nitro?
A: First, place the vehicle on supports, replace the tire and wheel assembly and mark the outer tie rod end near the inner one to make reinstallation simple. Relax the jam nut and free up the outer tie rod end nut (2). You should always disassemble the ball joints and tie rods using the correct tool so that the seal or knuckle will not be damaged. Using tool 9360 (2), carefully separate the end of the outer tie rod (1) from the knuckle (3) and keep note of the number of turns you make. Take the outer tie rod end (1) off of the inner one before moving on.