How to Remove and Service a Front Crankshaft Seal on 2007 Dodge Ram 1500?

First, take away the negative cable from the battery and take out the accessory drive belt before servicing or repairing the front crankshaft seal. Following this, get rid of the A/C compressor mounting screws, store them after and then drain the old anti-freeze system, removing the top radiator hose. Remove the fan connector inside the radiator surround, then pull out the fasteners and lift off the shroud, as the transmission cooler section attaches to the shroud's lower right. After that, get rid of the radiator cooling fan and its shroud and then remove the crankshaft damper bolt. Use tools 8513 Insert and 1026 Three Jaw Puller to remove the damper and then use Special Tool 8511 to remove the crankshaft front seal.

OEM 2007 Dodge Ram 1500 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2007 Dodge Ram 1500 Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Ram 1500 Oil Seal, Front Part Number: 53021585AD
$24.52 MSRP: $36.25
You Save: $11.73 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
- Position: Front
- Replaces: 53021585AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021585AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Ram 1500 Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Ram 1500 Rear Main Seal Part Number: 53021335AE
$94.83 MSRP: $142.00
You Save: $47.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
- Position: Rear
- Replaces: 53021335AD, 53021338AB, 68017721AA, 53021335BA, 53021335AC, 68060342AA, 5140028AA
- Item Weight: 3.10 Pounds
- Item Dimensions: 1.3 x 10.2 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021335AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS

2007 Dodge Ram 1500 Crankshaft Seal Parts and Q&A

Q: How to Remove and Service a Front Crankshaft Seal on 2007 Dodge Ram 1500?
A: First, take away the negative cable from the battery and take out the accessory drive belt before servicing or repairing the front crankshaft seal. Following this, get rid of the A/C compressor mounting screws, store them after and then drain the old anti-freeze system, removing the top radiator hose. Remove the fan connector inside the radiator surround, then pull out the fasteners and lift off the shroud, as the transmission cooler section attaches to the shroud's lower right. After that, get rid of the radiator cooling fan and its shroud and then remove the crankshaft damper bolt. Use tools 8513 Insert and 1026 Three Jaw Puller to remove the damper and then use Special Tool 8511 to remove the crankshaft front seal.