How to Maintain and Fix a Rear Seat Belt on 2007 Dodge Sprinter 3500?

You should first examine the seat belts, buckles, mounting hardware, retractors, tether straps and anchors, replacing worn, cut or torn belts, straightening out twisted ones and replacing any bent or damaged buckles, retractors, tether plates or anchors from the DaimlerChrysler Mopar Parts Catalog. Most of the retractor, including the seat belt, should be attached to the bracket on the rear bench, placing its tab inside the locating slot in the bench frame. Right after attaching the retractor, tighten the screw on the seat frame bracket to 37 Nm (27 ft. lbs.). Route the lower anchor, latch plate and seat belt webbing through the turning loop bracket and lower loops at the top of the seat back frame so that the webbing is not twisted. Attach the two bushings and the two turning loops to the bracket, placing one of each behind and one in front. Pass the pivot pin through the turning loops, bushings and bracket and hold it in place with the new push nut. Attach the cover to the rear seat back frame, put the trim cover on and finish with the padding once it is in place. Lead the seat belt webbing through the small trim bits and lock the covers to the top of the seatback frame. Push the plastic fasteners through the holes in the trim covers and turn them to attach them to the brackets. Put the lower anchor for each seat belt below the rear seat cushion frame, with two washers and a spacer in between and tighten the screws holding the lower anchor in place to 37 Nm (27 ft. lbs.) For the outboard left seat, set the plastic trim cap back onto the lower anchor screw. Buckle the seat belt onto the outside of the rear seat, place the molded plastic shield on its back and finish with the rear passenger bench back in the vehicle.

OEM 2007 Dodge Sprinter 3500 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2007 Dodge Sprinter 3500 Outer Buckle Part Number: 5124982AA
$32.91 MSRP: $44.90
You Save: $11.99 (27%)
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Buckle Half; Buckle; Latch; Seat Belt Buckle Half
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.3 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5124982AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Lap & Shoulder Belt, Rear Part Number: 68010992AA
$175.62 MSRP: $201.00
You Save: $25.38 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Retractor; Seat Belt Lap and Shoulder Belt, Rear; Belt & Retractor; Seat Belt Retractor
- Position: Rear
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.6 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68010992AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Lap & Shoulder Belt, Front Center Part Number: 1HF08DX8AA
$45.51 MSRP: $261.00
You Save: $215.49 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seatbelt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Center; Center Seat Belt; Seat Belt Front Outer
- Position: Front Center
- Replaces: 1HF08DX9AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.3 x 4.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HF08DX8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Lap & Shoulder Belt, Front Outer Part Number: 1HG34DX9AA
$49.97 MSRP: $287.00
You Save: $237.03 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly - Front Outer; Seat Belt Lap and Shoulder Belt, Front Outer; Belt & Retractor; Seat Belt Front Outer
- Position: Front Outer
- Item Weight: 3.50 Pounds
- Item Dimensions: 10.2 x 7.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HG34DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Latch Part Number: 1HE56DX9AA
$81.41 MSRP: $121.00
You Save: $39.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Buckle Half
- Replaced by: 1HE56DX9AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.7 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HE56DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Outer Buckle Part Number: 1HE56DX9AB
$81.41 MSRP: $121.00
You Save: $39.59 (33%)
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Buckle Half
- Replaces: 1HE56DX9AA, 68010832AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.7 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HE56DX9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Center Buckle, Rear Part Number: 1LK95DX9AA
Product Specifications
- Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center, Rear; Buckle; Latch; Seat Belt Buckle Half
- Position: Rear
- Replaces: 5104502AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.4 x 4.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1LK95DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Outer Buckle Part Number: 68010831AA
Product Specifications
- Other Name: Seat Belt - Buckle Half; Latch; Seat Belt Buckle Half
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.8 x 4.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68010831AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Lap & Shoulder Belt, Front Outer Part Number: 1HQ42DX9AB
Product Specifications
- Other Name: Belt Assembly - Front Outer; Seat Belt Lap and Shoulder Belt, Front Outer; Belt & Retractor
- Position: Front Outer
- Replaces: 1HQ42DX9AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 7.6 x 7.9 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HQ42DX9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 3500 Seat Belt Parts and Q&A

Q: How to Maintain and Fix a Rear Seat Belt on 2007 Dodge Sprinter 3500?
A: You should first examine the seat belts, buckles, mounting hardware, retractors, tether straps and anchors, replacing worn, cut or torn belts, straightening out twisted ones and replacing any bent or damaged buckles, retractors, tether plates or anchors from the DaimlerChrysler Mopar Parts Catalog. Most of the retractor, including the seat belt, should be attached to the bracket on the rear bench, placing its tab inside the locating slot in the bench frame. Right after attaching the retractor, tighten the screw on the seat frame bracket to 37 Nm (27 ft. lbs.). Route the lower anchor, latch plate and seat belt webbing through the turning loop bracket and lower loops at the top of the seat back frame so that the webbing is not twisted. Attach the two bushings and the two turning loops to the bracket, placing one of each behind and one in front. Pass the pivot pin through the turning loops, bushings and bracket and hold it in place with the new push nut. Attach the cover to the rear seat back frame, put the trim cover on and finish with the padding once it is in place. Lead the seat belt webbing through the small trim bits and lock the covers to the top of the seatback frame. Push the plastic fasteners through the holes in the trim covers and turn them to attach them to the brackets. Put the lower anchor for each seat belt below the rear seat cushion frame, with two washers and a spacer in between and tighten the screws holding the lower anchor in place to 37 Nm (27 ft. lbs.) For the outboard left seat, set the plastic trim cap back onto the lower anchor screw. Buckle the seat belt onto the outside of the rear seat, place the molded plastic shield on its back and finish with the rear passenger bench back in the vehicle.